LED Flood Light Certification

SABER Certificate for LED Flood Lights in Saudi Arabia

Exporting LED flood lights to Saudi Arabia? BenzilaCert helps manufacturers and importers assess the applicable classification, beam-angle variants, surge protection evidence, IP ratings and SABER certification route.

LED flood light luminaire with adjustable yoke bracket and tempered glass lens

Send to scope a flood light file:

  • Wattage & Model
  • Beam Angle
  • IP Rating
  • Surge Rating (kV)
Request Certification Assessment

Types of LED Flood Lights

Outdoor, sports, industrial and portable flood lights are not the same product for certification.

Outdoor LED flood lights

General-purpose floodlights for building facades, compounds and outdoor areas. Wattage ranges from 10 W to 1 000 W, and the beam angle defines the coverage.

Sports & stadium flood lights

High-output luminaires for sports fields and stadiums, where photometric aiming, glare control and lumen maintenance are assessed alongside the electrical safety.

Industrial flood lights

Flood lights designed for industrial yards, ports and heavy-duty sites. Surge protection and vibration resistance are additional assessment points.

Portable & temporary flood lights

Tripod-mounted or trailer-mounted units for construction sites and events. The portable assembly is assessed as a complete unit.

RGB & architectural flood lights

Colour-changing flood luminaires for architectural lighting, where the control interface and the dimming protocol may affect the product scope.

Saudi Regulations for LED Flood Lights

LED flood lights are commonly assessed under the technical regulation covering lighting products.

LED flood lights fall within the scope of lighting product regulations administered by SASO. Whether a specific fixture is assessed under the IECEE lighting scheme, a SABER PCoC route or another path depends on the Saudi HS code and the current regulation.

Surge protection and IP rating are key assessment points for outdoor flood lights. See LED lights certification for the broader lighting category.

Saudi HS Codes for LED Flood Lights

General outdoor, sports and industrial flood lights may classify under different headings.

A shipment mixing general flood lights and stadium-grade luminaires can carry separate classifications. Confirm the exact Saudi HS code before assigning the certification path — see our HS code check.

Flood Light Testing Requirements

Seven checks a flood light assessment may draw on, depending on the type and the route.

Technical checks commonly applied to LED flood lights
CheckWhat it looks at
Electrical safetyProtection class, insulation and creepage per the applicable IEC 60598 series
Photometric performanceTotal luminous flux, beam angle, efficacy and distribution from a goniophotometer report
IP ingress protectionDust and water resistance verified to IEC 60529 at the declared rating
Surge immunityLine-to-earth and line-to-line surge withstand at the declared kV level
Thermal managementLED junction and driver temperature performance under rated ambient
IK impact resistanceMechanical impact test where the declared IK rating applies
EMC compatibilityElectromagnetic emission and immunity screening per applicable standards

Test Reports and Technical Documents

What a photometric report and surge test establish, and what else is needed.

A photometric report records the luminous flux, beam angle and efficacy. A surge test report confirms the declared protection level. Together with the electrical safety report, the IP evidence and the driver specification, they form the technical file.

  • Confirmed Saudi HS code for the flood light type
  • Manufacturer and factory identification
  • Product datasheet with wattage, beam angle, lumen output, CCT and CRI
  • Photometric test report (IES or LDT file from an accredited lab)
  • Electrical safety test report to the applicable IEC 60598 series
  • IP test report at the declared rating
  • Surge protection device specification and test evidence
  • EMC test report where required
  • Driver specification and separate driver test report if applicable
  • Product labels and marking photographs

Not sure which route applies to your flood light?

Send the wattage, beam angle, IP rating and surge specification. We will confirm the applicable route before you commit to testing.

How Flood Light Certification Works

Five steps, from classification to shipment documentation.

  1. Classify the flood light product

    General outdoor, sports, industrial and portable flood lights may classify differently. The Saudi HS code and declared use determine the starting point.

  2. Confirm the certification route

    Check whether the product falls under the lighting IECEE scheme, SABER PCoC or another route based on the current regulation.

  3. Review test reports and photometric data

    Match the evidence against the declared specifications: wattage, beam angle, IP rating and surge protection.

  4. Submit to the certification body

    Prepare the technical file and apply for assessment. Factory inspection may apply depending on the scheme.

  5. Arrange shipment documentation

    Each consignment is documented with models, wattages and quantities matching the certification in place.

Certification Cost and Timeline

Driven by the flood light type, the number of beam-angle variants and the route.

The SABER platform fee, the certification body’s assessment, laboratory testing, factory audit where it applies and professional assistance are charged separately.

We quote per file and do not give guaranteed completion dates. See SABER certificate cost for how a quotation is itemized.

Common Flood Light Certification Problems

Six recurring issues in LED flood light files.

Surge rating claimed without evidence

A 10 kV or 20 kV surge claim on the datasheet with no surge test report to support it — a common query point.

Photometric report for the wrong beam angle

The test report covers a 60° optic but the model shipped uses a 120° lens. Each optical variant needs its own photometric file.

IP67 claimed for a vented housing

A flood light housing with a breather valve cannot meet IP67. The declared rating must match the physical construction.

Too many models on one application

A product family with different housings, different drivers and different wattage ranges treated as one series when they are separate products.

Wattage on the label differs from the report

The label says 200 W, the test report says 195 W. The numbers must match across the datasheet, the report and the product.

Driver mismatch between batches

The driver brand or model changed between production runs, but the certificate still references the original. A new assessment may be needed.

LED flood light certification questions

IECEE scope, test reports, beam angles, model grouping and factory inspection.

Do LED flood lights need SABER certification for Saudi Arabia?

LED flood lights are generally covered by a technical regulation that requires certification registered on SABER. The applicable route — IECEE, PCoC or another scheme — depends on the classification and the current rules.

Is the IECEE scheme applicable to LED flood lights?

Lighting products may fall within the IECEE mutual recognition scheme. Whether it applies to a specific flood light is confirmed from the current SASO scope list.

Which test reports are needed for flood light certification?

Typically an IEC 60598-series safety report, a goniophotometer photometric report, an IP test report, a surge test report and an EMC report. The exact set depends on the route.

Can different wattage models be combined on one certificate?

Models sharing the same housing and driver family may be grouped as a series. Models with different housings or a different driver platform are usually assessed separately.

Is factory inspection required for LED flood lights?

Some certification routes include a factory evaluation. Whether it applies is settled at classification and depends on the scheme.

What documents should I send to start?

The product datasheet, the photometric file, the safety and IP test reports, the surge specification, product photographs and the Saudi HS code if known. We review these and confirm the route.

Does the beam angle affect the certification?

Each beam angle that uses a different optical lens is treated as a distinct variant. The photometric report must cover the specific optic shipped.

Find out which route your flood light actually falls under

Send the wattage, beam angle, IP rating and surge details. We will review the classification, confirm the route and identify what evidence is missing.

Request an LED Flood Light Certification Assessment

Tell us the flood light type, wattage and beam angle. We reply within one business day with the likely route and what to send next.

Request a Free Quotation

The more we know about the product, the more precise the answer. Fields marked with an asterisk are required.

Datasheets, test reports, certificates or product photographs? Send them on WhatsApp after submitting — send your product documents for review. Please do not send SABER passwords or login credentials.