SABER Certificate forWelding Machines & Equipment
MMA Inverters, MIG/MAG, TIG, Plasma Cutters & Feeders
An inverter welder is a switched-mode power converter pulling a heavy, uneven load, so the file is about electrical safety and interference. The torch and the consumables are accessories. We separate the two before anything is filed.
- CertificatePCoC / SCoC*Product Certificate of Conformity & Shipment Certificate
- PCoC CostUSD 300
- Processing Time2–3 Working Days
- SADAD FeesPaid by Importer
Product & Regulation
HS Code
HS 8515
Electric welding and cutting machines. An engine-driven welder may be read against 8502 as a generating set. The Saudi code runs longer than four digits and is confirmed from the specification, not from the product name.
Regulation
Arc welding equipment standards (IEC 60974 family, with EMC evidence); electrical and machinery scope under review
Candidate review point, not a declaration that this route applies. Confirmed against the current regulation and model scope before anything is claimed.
Product
Welding power source, wire feeder or accessory, or engine-driven welder
What the assessment reads the product as, which decides the evidence it asks for.
Types of Welding Machines & Equipment
MMA inverter welders
Single-phase stick welders, the highest volume line in most ranges. Switched-mode units, so interference evidence matters as much as safety.
MIG and MAG machines
Wire-fed machines with an integral or separate feeder and a shielding gas supply. The feeder may be its own product on the file.
TIG machines
AC and DC TIG power sources, often with high-frequency start. The high-frequency circuit is usually the interference question.
Plasma cutters
Cutting power sources working at high open-circuit voltage, with compressed air. Cutting rather than welding, on closely related evidence.
Engine-driven welders
A welding power source on a combustion engine. Two products in one frame, so the route has to be settled before applying.
Torches, feeders and accessories
Torches, wire feed units, earth clamps, cables and regulators. Accessories on the welding file rather than power sources in themselves.
Each type is confirmed on its own classification and evidence. Which of them a single certificate can cover depends on how closely the constructions and test reports match.
Documents Required
- Product Details & Model List(every model, output current and supply configuration you intend to ship)
- Datasheet & Manufacturer Details
- Lab Test Report(No report? We can arrange testing.)
- Commercial Invoice & Packing List(needed at the shipment stage, not to start)
The core set. On welding equipment the file also turns on the declared output current and duty cycle, the supply voltage and phases, and whether the unit is mains fed or engine driven. Which further documents apply varies with the confirmed classification and the model scope, so the full list is issued per file rather than per category.
Sample Certificate
Illustrative layout only — not an issued certificate, and not a reproduction of one. Certificates are issued by approved conformity assessment bodies, not by BenzilaCert.
Application Examples
Typical files in this product family and the support they call for. Illustrative scenarios, not completed engagements.
- Example 01
Manufacturer shipping an inverter range
An illustrative range of single-phase inverter welders from 140 to 250 amps. The range is grouped by platform rather than by amperage, because the power stage is what the electrical evidence actually describes.
- Example 02
Distributor shipping machines with kits
An illustrative consignment of welders supplied with torches, cables and clamps. The power sources are separated from the kit contents, since the accessories do not carry the same evidence.
Get Your SABER Certificate
Send the Saudi HS Code if you have it, the product specification and a commercial invoice, and we will come back with the likely route and what is missing.
* Where applicable. Timelines and charges shown are indicative and subject to documentary review, and government and SADAD fees are separate from conformity body, testing and consultancy charges. The applicable Saudi regulation and the exact HS code must be confirmed from the product specification against the current SABER and ZATCA classification.
BenzilaCert is an independent consultancy providing application and documentation support. It is not SASO, SABER or a certificate-issuing authority, and does not issue conformity certificates.