UFO high-bay luminaires
Round compact high-bay fixtures for warehouses and factories, typically hook-mounted. The thermal design and the driver enclosure define the assessment scope.
Exporting industrial high-bay LED lights to Saudi Arabia? BenzilaCert helps manufacturers and importers assess the applicable luminaire classification, thermal endurance, IP ratings, driver documentation and SABER certification route.

Send to scope a high-bay file:
UFO, linear and explosion-proof high bays are not the same product for certification.
Round compact high-bay fixtures for warehouses and factories, typically hook-mounted. The thermal design and the driver enclosure define the assessment scope.
Elongated high-bay fixtures for aisle and rack lighting, where the mounting length, the reflector angle and the lumen output are assessed alongside the safety.
Luminaires rated for hazardous areas (Zone 1/Zone 2). Ex certification and SASOEX compliance add to the assessment beyond standard electrical safety.
Luminaires for mounting heights above 15 m in industrial yards and port facilities, where the photometric throw and the wind-load rating are critical.
Sealed luminaires for pharmaceutical and food-processing environments, where the IP rating, the smooth housing and the material compliance are assessed.
Industrial high-bay luminaires are commonly assessed under the technical regulation covering lighting products.
High-bay LED lights fall within the scope of lighting product regulations administered by SASO. Whether a specific luminaire is assessed under the IECEE scheme, a SABER PCoC route or another path depends on the Saudi HS code and the current regulation.
Luminaires rated for hazardous areas may additionally need SASOEX or IECEx certification — see SASOEX / IECEx compliance for that route.
UFO, linear and high-mast fixtures may classify under different headings.
A shipment mixing UFO high bays and linear fixtures can carry different classifications. Confirm the exact Saudi HS code before assigning the certification path — see our HS code check.
Seven checks a high-bay assessment may draw on.
| Check | What it looks at |
|---|---|
| Electrical safety | Protection class, insulation and temperature rise per the applicable IEC 60598 series |
| Thermal endurance | LED junction and driver temperature at the rated mounting height and ambient temperature |
| Photometric performance | Luminous flux, efficacy and distribution from a goniophotometer report |
| IP ingress protection | Dust and water resistance verified at the declared IP rating |
| IK impact resistance | Mechanical impact test at the declared IK level |
| Surge protection | Line surge withstand at the declared kV level |
| EMC compatibility | Electromagnetic emission and immunity per applicable standards |
What the thermal and photometric reports establish, and what else is needed.
Industrial high-bay luminaires operate at elevated ambient temperatures and mounting heights. The thermal report, the photometric file, the safety report and the driver specification form the core of the technical file.
Send the wattage, mounting height, IP rating and driver specification. We will confirm the applicable route before you commit to testing.
Five steps, from classification to shipment documentation.
UFO, linear and high-mast fixtures may classify differently. The Saudi HS code, the mounting environment and the IP rating determine the route.
Check whether the product falls under the IECEE lighting scheme, SABER PCoC or another route. Hazardous-area models may also need SASOEX.
Match the evidence against the declared wattage, lumen output, IP/IK rating and thermal performance at the intended mounting height.
Prepare the technical file and apply for assessment. Factory inspection may apply depending on the scheme.
Each consignment is documented with models, wattages and quantities matching the certification in place.
Driven by the luminaire type, the environment rating and the certification route.
The SABER platform fee, the certification body’s assessment, laboratory testing, factory audit where it applies and professional assistance are charged separately.
We quote per file and do not give guaranteed completion dates. See SABER certificate cost for how a quotation is itemized.
Six recurring issues in industrial high-bay light files.
The thermal report was run at 25 °C but the datasheet claims operation at 50 °C ambient. The evidence must cover the declared range.
An L70 or L80 life claim on the datasheet with no LM-80 report from the LED manufacturer to support it.
Different production batches use different driver brands. The certificate references one; the shipment contains another.
A UFO high bay and a linear high bay have different housings and thermal characteristics — they are separate products for certification.
The declared IP rating is compromised by an unsealed cable entry. The ingress protection applies to the luminaire as installed.
An Ex-rated high bay submitted on a standard lighting route when SASOEX or Ex-specific certification may apply.
The parent electrical category, the LED lighting hub, SASOEX for hazardous areas and the certificates a high-bay file is assessed toward.
IECEE scope, thermal data, hazardous areas, model grouping and factory inspection.
Industrial high-bay luminaires are generally covered by a technical regulation requiring certification registered on SABER. The exact route depends on the classification and the current rules.
Lighting products may fall within the IECEE scheme. Whether it applies to a specific high-bay model is confirmed from the current SASO scope list, not assumed.
Typically an IEC 60598-series safety report, a photometric report, IP and IK reports, thermal data and an EMC report. Hazardous-area models may need additional Ex reports.
Models sharing the same housing, driver platform and LED module may be grouped. Models with different thermal designs or housings are usually assessed separately.
Some certification routes include a factory evaluation. Whether it applies is settled at classification and depends on the scheme.
Luminaires rated for explosive atmospheres may need SASOEX or IECEx certification alongside the standard product route. The Ex rating determines the additional assessment.
The product datasheet, photometric file, safety and IP test reports, thermal data, driver specification, product photographs and the Saudi HS code if known.
Send the wattage, IP rating, mounting height and driver details. We will review the classification, confirm the route and identify what evidence is missing.
Tell us the luminaire type, wattage and intended mounting environment. We reply within one business day with the likely route and what to send next.