Plastic containers and films
Rigid containers, jars, bottles and film in various polymers. Resin, thickness and format are what define them rather than the word “plastic”.
Exporting packaging products to Saudi Arabia? We help review whether plastic, paper, cardboard or other packaging materials fall under applicable Saudi conformity requirements, and which technical documents may be needed.

Send to scope a packaging file:
Send the exact product description, intended use, Saudi HS code if available, manufacturer and technical specifications. Related items may need different classifications or certification routes.
Rigid containers, jars, bottles and film in various polymers. Resin, thickness and format are what define them rather than the word “plastic”.
Paperboard, kraft and folding cartons, specified by grammage, board grade and construction.
Single and double-wall transit packaging, where flute profile, board combination and burst or compression performance carry the specification.
Drums, pails, caps and closures. A closure is frequently an independently traded article with its own classification.
Pouches, liners, woven sacks and stretch and shrink film supplied for industrial use.
Packaging intended to contact food, which requires a separate regulatory review rather than the general packaging route.
Packaging is not one regulated family — material, use and classification decide the route.
Packaging does not sit under a single Saudi rule, and a mandatory PCoC is not a safe assumption across the category. The material, the intended use, the product form and the Saudi HS code together determine whether a requirement applies at all and which route follows.
Products intended for food contact, or for regulated contents, may require additional SFDA or other sector-specific checks on top of — or instead of — the general route. That is screened from the intended use before anything is applied for.
The full Saudi HS code, the product specifications and the intended use together determine which technical regulation applies and which assessment route follows from it. No universal code is published here for the packaging family — see our HS code check.
Where the product is regulated, a Product Certificate of Conformity and shipment documentation may be required. For other products a different registration or declaration route may apply. Additional sector approvals or a factory assessment are discussed only once they are verified for the particular product — see PCoC versus SCoC for how the two certificates differ.
The same carton, two different routes, decided by what goes inside it.
A plastic container supplied for industrial parts and the same container supplied to hold food are not the same regulatory proposition. Food-contact use can bring material suitability evidence and a different authority’s requirements into play, and the packaging is then assessed alongside the product it is intended to contain.
For that reason the intended use is established at the start rather than inferred from the format. Where the packaging is destined for food or other regulated contents, see SFDA compliance and food import compliance for the routes that sit alongside this one.
Separately imported, or part of another product?
Packaging imported and declared in its own right is handled differently from packaging arriving as part of a finished product. Which of the two applies is confirmed from how the consignment is actually invoiced.
A preliminary preparation list — the final evidence set is decided by the applicable regulation.
This is what lets an assessment start. The certification body and the applicable Saudi regulation determine the final technical evidence, and existing reports are not guaranteed to be accepted — what counts is whether they cover the product actually being supplied. See technical documentation review for how a file is checked before submission.
Send the material, the format and what the packaging is intended to contain. We will review whether a requirement applies before you plan around one.
Five steps, from product details to shipment documentation.
Product name, material, format, dimensions, photographs, the manufacturer and the Saudi HS code if you have it.
Establish whether the item falls under an applicable Saudi rule at all, and whether the intended contents bring a separate review with them.
Check specifications, any material or performance evidence, labels and manufacturer consistency against the route.
Arrange testing, a factory assessment or other approvals only where the applicable scheme actually calls for them.
Coordinate with the authorized Saudi importer and the approved conformity assessment body, as applicable to the product.
Driven by the intended use as much as by the material.
The total depends on the SABER platform charges, the certification body’s review, any testing, an inspection where the scheme calls for one, and the agreed professional support. Timelines depend on the scope, the evidence and reviewer availability. On packaging, a food-contact claim is usually what changes the shape of the project.
We quote once the actual product has been reviewed, and we do not promise guaranteed approval or a fixed turnaround. See SABER certificate cost for how a quotation is itemized.
Six recurring issues in packaging files.
Packaging intended for food contact can bring additional requirements and a different authority into the picture. Check the intended use before the route.
A polymer named loosely, or a coated board described as plain paperboard. Confirm the actual composition — it is part of the classification.
No thickness, grammage or size specification, so there is nothing for an assessment to match a specification sheet against.
Whether the packaging is separately imported and declared, or supplied as part of another product, changes how it is handled.
Formats and thicknesses grouped under one scope that the assessment has not approved.
The producing plant on the specification, the manufacturer on the application and the supplier on the invoice should reconcile.
The parent service page, the SFDA routes for food-contact use, and the certificates a packaging file is assessed toward.
PCoC obligations, food versus industrial packaging, HS codes, size scope, test reports and label review.
No. Whether a packaging product is regulated at all depends on its Saudi HS code, its material and its intended use, so the classification and the requirements currently in force are checked first. Some packaging falls under an applicable regulation; some does not.
No. Packaging intended to contact food, or to contain regulated contents, may bring additional SFDA or other sector-specific requirements that general industrial packaging does not. The intended use is screened before the route is chosen — see our SFDA compliance pages.
No. Classification depends on the material and the type of article, so a plastic film, a corrugated carton and a moulded closure sit under different headings with potentially different requirements behind them.
Only if the applicable assessment permits that scope. Where formats share a material and a construction and the evidence supports the range, grouping is often possible; it is confirmed by the certification body rather than assumed.
Only where the product route requires supporting evidence. Material or performance testing is not a general obligation across the packaging category, and what is needed follows the applicable regulation rather than the product name.
Yes, as a document-preparation service: we check the label content and the declaration against the product and the requirements being applied. Any official decision remains with the responsible authority and the approved conformity assessment body.
Send your product details and existing technical documents. We will check the applicable Saudi requirements and prepare the next steps with the authorized parties.
Tell us the material, the format and thickness, the intended use and whether the packaging will contact food. We reply within one business day with the likely route and what to send next.