SABER Certificate forEarthing Products
Earthing & Grounding Equipment
Support with Saudi conformity review for earth rods, clamps and grounding components.

- CertificatePCoC / SCoC*Product Certificate of Conformity & Shipment Certificate
- PCoC CostUSD 300
- Processing Time2–3 Working Days
- SADAD FeesPaid by Importer
Product & Regulation
HS Code
HS 8536
Apparatus for making connections in circuits, which covers clamps and connectors. Copper rods, tapes and bars are classified by material instead, under 7407 and 7419. The Saudi code runs longer than four digits and is confirmed from the specification, not from the product name.
Regulation
IEC 62561 / IEC 60364 relevant aspects; confirm classification
Candidate review point, not a declaration that this route applies. Confirmed against the current regulation and model scope before anything is claimed.
Product
Earth rods, clamps, conductors and grounding systems
What the assessment reads the product as, which decides the evidence it asks for.
Types of Earthing Products
Copper-bonded and solid earth rods
Driven rods declared by diameter, length and copper bonding thickness. The coating thickness decides service life and is measured.
Clamps, couplers and driving heads
Rod-to-cable clamps, threaded couplers and driving accessories. Each is a separate product and may classify separately from the rod.
Earth bars, plates and mats
Copper bars with disconnecting links, buried plates and mesh mats, declared by material, dimensions and any current rating claimed.
Bare and tinned earthing conductors
Bare copper tape and stranded conductor for buried electrodes and bonding, declared by cross-section and material.
Lightning protection components
Air terminals, down conductors, holders and test joints — a different application from electrical earthing, with its own standards.
Exothermic welding consumables
Welding powder and conductive backfill: chemical products with safety data sheet obligations, not an electrical route.
Each type is confirmed on its own classification and evidence. Which of them a single certificate can cover depends on how closely the constructions and test reports match.
Documents Required
- Lab Test Report(No report? We can arrange testing.)
- Commercial Invoice
- Packing List
The core set. On this family the file also turns on copper/steel, plating, resistance evidence, lightning vs grounding application. Which further documents apply varies with the confirmed classification and the model scope, so the full list is issued per file rather than per category.
Sample Certificate
Illustrative layout only — not an issued certificate, and not a reproduction of one. Certificates are issued by approved conformity assessment bodies, not by BenzilaCert.
Application Examples
Typical files in this product family and the support they call for. Illustrative scenarios, not completed engagements.
- Example 01
Copper-bonded earthing rod
A copper-bonded rod range, where the declared coating thickness is the product claim and an installed earth resistance figure is not.
- Example 02
Grounding conductor and clamp
Conductors, clamps and bars, which classify separately from the rods and are where any declared fault current rating actually sits.
Get Your SABER Certificate
Send the Saudi HS Code if you have it, the product specification and a commercial invoice, and we will come back with the likely route and what is missing.
* Where applicable. Timelines and charges shown are indicative and subject to documentary review, and government and SADAD fees are separate from conformity body, testing and consultancy charges. The applicable Saudi regulation and the exact HS code must be confirmed from the product specification against the current SABER and ZATCA classification.
BenzilaCert is an independent consultancy providing application and documentation support. It is not SASO, SABER or a certificate-issuing authority, and does not issue conformity certificates.

