SABER Certificate forTraffic Control Devices
Traffic Signals, Controllers, Electronic Signs, Beacons & Vehicle Detection
Everything here is powered and lives outdoors, so the file is a photometric and electrical one rather than a reflectivity one. We separate the signal head, the controller and — on a solar unit — the panel, battery and charge controller, because the invoice calls all of it one sign.

- CertificatePCoC / SCoC*Product Certificate of Conformity & Shipment Certificate
- PCoC CostUSD 300
- Processing Time2–3 Working Days
- SADAD FeesPaid by Importer
Product & Regulation
HS Code
HS 8530
Electrical signalling, safety and traffic control equipment, which is where a signal head and a signalling installation sit. A controller cabinet falls under 8537, an electronic message sign under 8531, a vehicle detection sensor under 9031 and a solar module and battery supplied in the same housing under 8541 and 8507, so one signalised junction order routinely spans four headings. The Saudi code runs longer than four digits and is confirmed from the construction and the declared function, not from the product name.
Regulation
Photometric and chromaticity requirements for signal aspects together with low-voltage electrical safety and outdoor ingress requirements, with road authority specification applying to the signalling installation and communications type approval applying separately to any remote-monitoring radio; candidate pending verification
Candidate review point, not a declaration that this route applies. Confirmed against the current regulation and model scope before anything is claimed.
Product
A powered or illuminated traffic device — a signal head, a controller, an electronic sign, a beacon or a detection sensor — supplied as its own product, with a solar unit treated as the module, battery, charge controller and device it contains
What the assessment reads the product as, which decides the evidence it asks for.
Types of Traffic Control Devices
Traffic signal heads and pedestrian signals
Vehicle, pedestrian and cycle aspects with their lenses and visors. Certified on measured intensity and on the colour falling inside the signal boundaries, so an LED module change is a photometric change.
Signal controllers and cabinets
Junction controllers, roadside cabinets and the protection inside them. A built electrical assembly in its own right, and usually the item a consignment is actually waiting on.
Variable message and electronic signs
Matrix and full-colour message signs, lane control and speed display signs. Assessed as outdoor luminous signs, where legibility distance and sunlight readability are the claims made.
Warning beacons and flashing lights
Flashing amber beacons, school zone flashers and solar warning lights. A mains beacon and the same beacon on a solar post are two different product files.
Vehicle detection and enforcement equipment
Inductive loop detectors, radar and video detection and speed enforcement units. Measuring instruments as much as traffic devices, and anything emitting radar is a radio product too.
Solar power packs for traffic devices
The module, sealed battery, charge controller and pole bracket supplied with a sign or beacon. Four separate products in one housing, and the battery is the one most often missing from the model list.
Each type is confirmed on its own classification and evidence. Which of them a single certificate can cover depends on how closely the constructions and test reports match.
Documents Required
- Product Details & Model List(with the head, controller, solar module and battery listed as their own items)
- Datasheet & Manufacturer Details
- Lab Test Report(No report? We can arrange testing.)
- Commercial Invoice & Packing List(needed at the shipment stage, not to start)
The core set. On traffic control the file also turns on the luminous intensity and chromaticity of each aspect, the supply voltage and power, the ingress and impact rating of the outdoor housing, the lens and visor arrangement, the controller protection, conflict monitoring and fail-to-flash behaviour, and on a solar unit the module rating, battery chemistry and capacity, and autonomy claimed. Which further documents apply varies with the confirmed classification and the model scope, so the full list is issued per file rather than per category.
Sample Certificate
Illustrative layout only — not an issued certificate, and not a reproduction of one. Certificates are issued by approved conformity assessment bodies, not by BenzilaCert.
Application Examples
Typical files in this product family and the support they call for. Illustrative scenarios, not completed engagements.
- Example 01
Contractor equipping a signalised junction
An illustrative contractor importing signal heads, pedestrian aspects, a controller cabinet and loop detectors for one intersection. The heads and the controller are separated on the model list, because the photometric and the electrical evidence do not come from the same report.
- Example 02
Supplier bringing in solar warning signs
An illustrative supplier importing solar flashing signs as a single catalogue line. The module, battery and charge controller inside are listed as their own items before the application is started.
Get Your SABER Certificate
Send the Saudi HS Code if you have it, the product specification and a commercial invoice, and we will come back with the likely route and what is missing.
* Where applicable. Timelines and charges shown are indicative and subject to documentary review, and government and SADAD fees are separate from conformity body, testing and consultancy charges. The applicable Saudi regulation and the exact HS code must be confirmed from the product specification against the current SABER and ZATCA classification.
BenzilaCert is an independent consultancy providing application and documentation support. It is not SASO, SABER or a certificate-issuing authority, and does not issue conformity certificates.

