SABER Certificate forRoad Safety Equipment

Barriers, Bollards, Cones, Delineators, Road Studs & Reflective Sheeting

Most road safety products are judged on the reflective sheeting they carry rather than the body it is stuck to, and a crash barrier is judged on a full-scale impact test of one named assembly. We establish which property is actually being certified before the material certificates are collected.

Three traffic cones of descending height standing in a row on square black bases, each with two plain reflective bands, beside a slim white flexible delineator post on a flat round base
  • CertificatePCoC / SCoC*Product Certificate of Conformity & Shipment Certificate
  • PCoC CostUSD 300
  • Processing Time2–3 Working Days
  • SADAD FeesPaid by Importer

Product & Regulation

HS Code

HS 3926

Other articles of plastics, which is where moulded cones, delineators and plastic barrier units sit. A steel crash barrier rail falls under 7308, a cast road stud under 7325 or 3926 depending on body material, a concrete barrier unit under 6810 and reflective sheeting supplied by the roll under 3919 or 3920, so one road furniture order routinely spans four headings. The Saudi code runs longer than four digits and is confirmed from the material and the declared function, not from the product name.

Regulation

Retroreflective performance requirements for the sheeting class applied to road furniture, with full-scale impact performance and containment level requirements applying to vehicle restraint systems and road authority specification applying to installed works; candidate pending verification

Candidate review point, not a declaration that this route applies. Confirmed against the current regulation and model scope before anything is claimed.

Product

Passive, unpowered road furniture — a channelising device, a vehicle restraint system, a bollard, a road stud or reflective sheeting supplied as material. Anything illuminated, powered or signalled is a different product class

What the assessment reads the product as, which decides the evidence it asks for.

Types of Road Safety Equipment

  • Cones, delineators and channelising devices

    Traffic cones, flexible delineator posts, tubular markers and barricade boards. Rated on the sheeting band rather than the body, with mass and base type deciding whether the device stays put in wind and wash.

  • Vehicle restraint systems and crash barriers

    Steel W-beam and thrie-beam barrier, cable barrier and concrete barrier units. The certified thing is a tested assembly over a stated length, so a substituted post or a wider spacing leaves the report behind.

  • Bollards, wheel stops and kerb units

    Fixed, removable and flexible bollards, parking wheel stops and rubber kerb sections. Impact behaviour and fixing method carry the file, and a security bollard rated against vehicle attack is a separate claim entirely.

  • Road studs, markers and raised pavement markers

    Glass, ceramic and plastic-bodied studs and reflective pavement markers. Compressive strength under traffic and retained reflectivity after wear are the two properties, and a solar stud is not in this family.

  • Reflective sheeting, tape and conspicuity markings

    Engineering, high intensity and microprismatic sheeting by the roll, plus reflective tape and contour marking. Supplied as material and certified as material, which is why the class travels with the sheeting, not the sign it ends up on.

  • Work zone and temporary safety equipment

    Water-filled and plastic barriers, speed humps, convex mirrors and temporary fencing panels. Short-service items where ballast, visibility and handling weight decide the specification.

Each type is confirmed on its own classification and evidence. Which of them a single certificate can cover depends on how closely the constructions and test reports match.

Documents Required

  • Product Details & Model List(with the reflective sheeting class stated per item)
  • Datasheet & Manufacturer Details
  • Lab Test Report(No report? We can arrange testing.)
  • Commercial Invoice & Packing List(needed at the shipment stage, not to start)

The core set. On road safety equipment the file also turns on the reflective sheeting class and its measured coefficient of retroreflection, the body material and its behaviour on impact, the mass and base type for a free-standing device, the galvanising thickness on steel parts, and for a restraint system the containment level, the tested post spacing and anchorage, and the installed length the test covers. Which further documents apply varies with the confirmed classification and the model scope, so the full list is issued per file rather than per category.

Sample Certificate

Illustrative layout only — not an issued certificate, and not a reproduction of one. Certificates are issued by approved conformity assessment bodies, not by BenzilaCert.

Application Examples

Typical files in this product family and the support they call for. Illustrative scenarios, not completed engagements.

  • Example 01

    Maker shipping cones in two sheeting grades

    An illustrative manufacturer sending one cone body in two reflective grades for two different road classes. The bodies are identical and the files are not, because the certified property sits in the sleeve.

  • Example 02

    Contractor importing barrier for a highway run

    An illustrative contractor bringing in W-beam rail, posts, spacers and terminals for a stretch of highway. The tested assembly and post spacing are checked against the drawing before the steel is ordered, not after it lands.

Get Your SABER Certificate

Send the Saudi HS Code if you have it, the product specification and a commercial invoice, and we will come back with the likely route and what is missing.

WhatsApp: +91 91300 30031No Advance Payment | Available 24/7

* Where applicable. Timelines and charges shown are indicative and subject to documentary review, and government and SADAD fees are separate from conformity body, testing and consultancy charges. The applicable Saudi regulation and the exact HS code must be confirmed from the product specification against the current SABER and ZATCA classification.
BenzilaCert is an independent consultancy providing application and documentation support. It is not SASO, SABER or a certificate-issuing authority, and does not issue conformity certificates.