SABER Certificate forPlayground Equipment

Slides, Swings, Multi-Play Structures, Spring Rockers & Safety Surfacing

Playground equipment is certified as an erected assembly over a tested surface: the free height of fall sets the surfacing requirement, and the entrapment gaps are gauged on the assembled unit. We establish the pairing before the play equipment evidence is collected.

A curved open slide chute section lying with its wide rolled side rails, a square perforated platform deck standing on two short posts beside it, a guardrail infill panel of evenly spaced vertical bars standing on edge behind, and two post caps with a galvanised ground anchor sleeve set out in front
  • CertificatePCoC / SCoC*Product Certificate of Conformity & Shipment Certificate
  • PCoC CostUSD 300
  • Processing Time2–3 Working Days
  • SADAD FeesPaid by Importer

Product & Regulation

HS Code

HS 9506

Articles and equipment for general physical exercise, gymnastics and athletics, which is where a fixed play structure generally sits — though a roundabout or fairground-type ride may be read under 9508 instead, and that distinction changes the requirement rather than only the duty. Rubber safety tiles and wet-pour fall under 4016, the steel structure under 7308, moulded chutes and panels under 3926, and chain and fittings under 7315 or 7326. The Saudi code runs longer than four digits and is confirmed from the construction and the declared function, not from the product name.

Regulation

Playground equipment and surfacing requirements covering the free height of fall and the critical fall height of the surface beneath it, head, neck, finger and clothing entrapment openings gauged on the assembled unit, the structural integrity of the erected structure including its foundations and anchorage, the impact attenuation of the surfacing, and the age group the unit is designed for; candidate pending verification

Candidate review point, not a declaration that this route applies. Confirmed against the current regulation and model scope before anything is claimed.

Product

Fixed play equipment intended for unsupervised collective use, certified as an installed assembly together with its surfacing and foundations. A toy, an activity toy for family domestic use and a fairground ride are different product classes on different routes

What the assessment reads the product as, which decides the evidence it asks for.

Types of Playground Equipment

  • Slides, chutes and climbing units

    Straight, curved and tube slides, climbing walls and nets. The slide sets the free height of fall for everything beneath it, and a dark chute is a surface temperature question.

  • Swings, hangers and seats

    Swing frames, hanger bearings, chains, flat seats and cradle seats. The impact area extends well beyond the frame, so the surfacing requirement is set by the swing more often than by anything else.

  • Multi-play structures, decks and towers

    Combination units with platforms, guardrails, bridges and roofs. The largest source of gauged openings, because every junction between two components makes a gap.

  • Impact-attenuating tiles and wet-pour surfacing

    Rubber safety tiles, poured wet-pour systems and loose fill. Certified to a critical fall height, which is the number that has to match the equipment standing on it.

  • Spring rockers, seesaws and rotating units

    Spring-mounted and pivoting equipment, roundabouts and rotating play items. Moving parts at child height, so the shear and crush gaps are assessed through the full movement.

  • Enclosures, gates and shade structures

    Perimeter fencing, self-closing gates and shade canopies around the play area. Part of the installed site rather than of the play unit, but they arrive on the same order.

Each type is confirmed on its own classification and evidence. Which of them a single certificate can cover depends on how closely the constructions and test reports match.

Documents Required

  • Product Details & Model List(with the free height of fall and age group for each unit)
  • Datasheet & Manufacturer Details
  • Lab Test Report(No report? We can arrange testing.)
  • Commercial Invoice & Packing List(needed at the shipment stage, not to start)

The core set. On playground equipment the file also turns on the free height of fall and the extent of the impact area around the unit, the critical fall height the surfacing is tested to and its measured impact attenuation, every gauged entrapment opening on the assembly, the age group declared, the foundation and anchorage detail, the ultraviolet resistance of the plastics and the surface temperature a dark component will reach in direct sun, and the installation and inspection instructions supplied with the unit. Which further documents apply varies with the confirmed classification and the model scope, so the full list is issued per file rather than per category.

Sample Certificate

Illustrative layout only — not an issued certificate, and not a reproduction of one. Certificates are issued by approved conformity assessment bodies, not by BenzilaCert.

Application Examples

Typical files in this product family and the support they call for. Illustrative scenarios, not completed engagements.

  • Example 01

    Maker shipping a unit with its surfacing

    An illustrative manufacturer sending a multi-play tower together with rubber tiles. Two products, one claim, because the tiles have to be tested to the fall height the tower creates.

  • Example 02

    Supplier importing units for several parks

    An illustrative municipal supplier bringing in slides, swings and spring rockers for different age bands. The age band is confirmed per unit first, because it sets the geometry that is being declared.

Get Your SABER Certificate

Send the Saudi HS Code if you have it, the product specification and a commercial invoice, and we will come back with the likely route and what is missing.

WhatsApp: +91 91300 30031No Advance Payment | Available 24/7

* Where applicable. Timelines and charges shown are indicative and subject to documentary review, and government and SADAD fees are separate from conformity body, testing and consultancy charges. The applicable Saudi regulation and the exact HS code must be confirmed from the product specification against the current SABER and ZATCA classification.
BenzilaCert is an independent consultancy providing application and documentation support. It is not SASO, SABER or a certificate-issuing authority, and does not issue conformity certificates.