SABER Certificate forIndustrial Valves

Ball, Gate, Butterfly, Check, Globe & Control Valves

A valve is not a fitting. It has to hold a rated pressure and then shut off to a declared leakage class, so the file turns on pressure class, seat performance and the service medium rather than on the nominal bore. One body in two seat materials is two products.

A flanged steel ball valve with a lever handle standing on a plain surface beside a smaller threaded brass ball valve
  • CertificatePCoC / SCoC*Product Certificate of Conformity & Shipment Certificate
  • PCoC CostUSD 300
  • Processing Time2–3 Working Days
  • SADAD FeesPaid by Importer

Product & Regulation

HS Code

HS 8481

Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks and vats. A valve sits here rather than with the pipe fittings it is invoiced alongside, and an actuator supplied separately can classify on its own. The Saudi code runs longer than four digits and is confirmed from the specification, not from the product name.

Regulation

Pressure-containing valve requirements (pressure class, shell and seat leakage performance, body material and service medium); separation from the network pipes and fittings scope under review

Candidate review point, not a declaration that this route applies. Confirmed against the current regulation and model scope before anything is claimed.

Product

Hand-operated isolation valve, automatic or self-acting valve, or an actuated valve assembly

What the assessment reads the product as, which decides the evidence it asks for.

Types of Industrial Valves

  • Ball and plug valves

    Quarter-turn isolation valves in brass, bronze or steel. Seat material sets the temperature and medium limits, not the body.

  • Gate and globe valves

    Rising and non-rising stem gate valves and globe valves for throttling. Shell strength and seat tightness proved separately.

  • Butterfly valves

    Wafer, lugged and flanged butterfly valves. The liner is the sealing element and decides the service, so it is declared with the body.

  • Check and non-return valves

    Swing, lift and dual-plate check valves. Self-acting, so cracking pressure and reverse-flow sealing carry the file.

  • Safety and pressure relief valves

    Relief and safety valves protecting vessels and lines. Set pressure and discharge capacity are the rating, and both are certified figures.

  • Actuated and control valves

    Valves supplied with an electric, pneumatic or hydraulic actuator. The actuator is a product of its own and brings its own route with it.

Each type is confirmed on its own classification and evidence. Which of them a single certificate can cover depends on how closely the constructions and test reports match.

Documents Required

  • Product Details & Model List(every size, pressure class and seat material in the range)
  • Datasheet & Manufacturer Details
  • Lab Test Report(No report? We can arrange testing.)
  • Commercial Invoice & Packing List(needed at the shipment stage, not to start)

The core set. On valves the file also turns on the declared pressure class and test pressures, the body, trim and seat materials, the leakage class claimed, the service medium and temperature range, and whether the valve ships bare or with an actuator fitted. Which further documents apply varies with the confirmed classification and the model scope, so the full list is issued per file rather than per category.

Sample Certificate

Illustrative layout only — not an issued certificate, and not a reproduction of one. Certificates are issued by approved conformity assessment bodies, not by BenzilaCert.

Application Examples

Typical files in this product family and the support they call for. Illustrative scenarios, not completed engagements.

  • Example 01

    Manufacturer shipping a ball valve range

    An illustrative valve maker with one body design in six sizes, two pressure classes and two seat materials. The range groups by pressure class and seat, not by size, because that is where the evidence changes.

  • Example 02

    Importer with a mixed valve and fitting order

    An illustrative consignment of butterfly valves, flanges and elbows on one invoice. The valves are filed as pressure-containing products and the fittings stay on the pipes and fittings route.

Get Your SABER Certificate

Send the Saudi HS Code if you have it, the product specification and a commercial invoice, and we will come back with the likely route and what is missing.

WhatsApp: +91 91300 30031No Advance Payment | Available 24/7

* Where applicable. Timelines and charges shown are indicative and subject to documentary review, and government and SADAD fees are separate from conformity body, testing and consultancy charges. The applicable Saudi regulation and the exact HS code must be confirmed from the product specification against the current SABER and ZATCA classification.
BenzilaCert is an independent consultancy providing application and documentation support. It is not SASO, SABER or a certificate-issuing authority, and does not issue conformity certificates.