SABER Certificate forIndustrial Safety Signs & Markings

Safety Signboards, Photoluminescent Signs, Warning Labels & Floor Marking

A safety sign is certified on its substrate and its measured luminance, not on its message — and the message is a separate Arabic labelling question that no test report answers. We separate the two before the signage evidence is collected.

Four blank industrial sign blanks in different substrates — a rigid rectangular panel upright on an easel stand, a triangular blank leaning against it, and a round blank and a smaller rectangular vinyl-faced blank lying flat, each with punched fixing holes near its corners
  • CertificatePCoC / SCoC*Product Certificate of Conformity & Shipment Certificate
  • PCoC CostUSD 300
  • Processing Time2–3 Working Days
  • SADAD FeesPaid by Importer

Product & Regulation

HS Code

HS 8310

Sign plates, name plates and similar plates, numbers, letters and other symbols of base metal, which is where a powder-coated aluminium or steel signboard sits. A rigid plastic sign falls under 3926, self-adhesive film, tape and photoluminescent sheeting under 3919 or 3920, an illuminated sign under 9405, and anti-slip tread tape under 3919 or 6805 depending on the grit carrier. One signage order routinely spans four headings. The Saudi code runs longer than four digits and is confirmed from the construction and the declared function, not from the product name.

Regulation

Safety sign and safety colour requirements covering the prescribed shape, colour and graphical symbol for each class of sign, together with the substrate requirements — weathering and colour fastness, the measured luminance and decay of photoluminescent material, the retroreflective coefficient and class of reflective material, adhesive performance and service temperature — and the Arabic language requirement that applies to the printed wording; candidate pending verification

Candidate review point, not a declaration that this route applies. Confirmed against the current regulation and model scope before anything is claimed.

Product

A passive printed, laminated or moulded sign, label or marking product, assessed on its substrate and its optical performance. An internally illuminated or self-testing exit sign is a luminaire with a battery and a different product class

What the assessment reads the product as, which decides the evidence it asks for.

Types of Industrial Safety Signs & Markings

  • Rigid safety signboards

    Prohibition, warning, mandatory and safe-condition boards in rigid PVC, aluminium or glass-reinforced plastic. The class sets the shape and colour; the substrate sets the test.

  • Photoluminescent and escape route signs

    Signs and sheeting that charge under ambient light and emit in darkness. Declared on the luminance still measurable after a stated charge and decay time, which is the only number that matters here.

  • Warning, hazard and equipment labels

    Self-adhesive labels for machinery, panels, chemical containers and lifting gear. Assessed as an adhesive film — peel, service temperature and print durability — and separately on wording.

  • Floor marking and anti-slip products

    Line marking tape, hazard tape, anti-slip tread strips and cable protector ramps. Walked on rather than looked at, so slip resistance and wear join the optical questions.

  • Pipe, valve and cable identification markers

    Pipe content bands, valve tags and cable markers. Small products carrying a mandatory colour scheme, where the colour itself is the compliance claim.

  • Reflective site and vehicle marking

    Retroreflective sheeting, conspicuity tape and site hazard panels. The reflective class is the certified property; road furniture and powered signs sit on their own pages.

Each type is confirmed on its own classification and evidence. Which of them a single certificate can cover depends on how closely the constructions and test reports match.

Documents Required

  • Product Details & Model List(listed by substrate, not by artwork)
  • Datasheet & Manufacturer Details
  • Lab Test Report(No report? We can arrange testing.)
  • Commercial Invoice & Packing List(needed at the shipment stage, not to start)

The core set. On signage the file also turns on the substrate and its thickness, the luminance of photoluminescent material measured after a stated charge and at stated decay intervals, the retroreflective coefficient and sheeting class of any reflective face, colour fastness and weathering for outdoor service, the peel strength and service temperature range of an adhesive product, the slip resistance of floor marking and tread products, and the Arabic wording, which is assessed separately from any test. Which further documents apply varies with the confirmed classification and the model scope, so the full list is issued per file rather than per category.

Sample Certificate

Illustrative layout only — not an issued certificate, and not a reproduction of one. Certificates are issued by approved conformity assessment bodies, not by BenzilaCert.

Application Examples

Typical files in this product family and the support they call for. Illustrative scenarios, not completed engagements.

  • Example 01

    Printer shipping one artwork on three substrates

    An illustrative sign maker sending the same warning on rigid PVC, on aluminium and on self-adhesive vinyl. One design, three products, because the weathering and adhesive results do not carry between substrates.

  • Example 02

    Supplier importing signs with exit luminaires

    An illustrative safety supplier bringing in printed signage together with illuminated exit units. The illuminated units are separated first, because a luminaire with a battery does not share a route with a printed board.

Get Your SABER Certificate

Send the Saudi HS Code if you have it, the product specification and a commercial invoice, and we will come back with the likely route and what is missing.

WhatsApp: +91 91300 30031No Advance Payment | Available 24/7

* Where applicable. Timelines and charges shown are indicative and subject to documentary review, and government and SADAD fees are separate from conformity body, testing and consultancy charges. The applicable Saudi regulation and the exact HS code must be confirmed from the product specification against the current SABER and ZATCA classification.
BenzilaCert is an independent consultancy providing application and documentation support. It is not SASO, SABER or a certificate-issuing authority, and does not issue conformity certificates.