SABER Certificate forIndustrial Ovens & Furnaces
Batch, Conveyor, Drying, Curing & Heat Treatment Equipment
How the heat is made decides the route. An electric oven is electrical equipment with a controller and a cut-out; a gas-fired one is a combustion appliance with a burner and a gas train. We settle that first, then set out the Saudi file.

- CertificatePCoC / SCoC*Product Certificate of Conformity & Shipment Certificate
- PCoC CostUSD 300
- Processing Time2–3 Working Days
- SADAD FeesPaid by Importer
Product & Regulation
HS Code
HS 8514
Industrial electric furnaces and ovens. Gas-fired and other non-electric equipment falls under 8417 instead. The Saudi code runs longer than four digits and is confirmed from the specification, not from the product name.
Regulation
Industrial thermal processing equipment standards (IEC 60519 / EN 746 and gas appliance families); electrical, machinery and gas scope under review
Candidate review point, not a declaration that this route applies. Confirmed against the current regulation and model scope before anything is claimed.
Product
Electrically heated oven or furnace, gas-fired thermal equipment, or heating component
What the assessment reads the product as, which decides the evidence it asks for.
Types of Industrial Ovens & Furnaces
Batch and chamber ovens
Loaded and unloaded through a door, declared by chamber volume and maximum temperature. The common industrial oven across most processes.
Conveyor and continuous ovens
Tunnel ovens with a belt running through. The conveyor drive adds a machine element on top of the heating side.
Drying and curing ovens
Lower temperature ovens for paint, powder coat and moisture removal. Airflow and extraction are part of what is declared.
Laboratory and muffle furnaces
Small high-temperature furnaces for test and laboratory work. User-facing bench equipment, so surface temperature is scrutinised.
Heat treatment furnaces
Hardening, annealing and tempering furnaces at high temperature. Often supplied in sections, which changes who declares the finished product.
Gas-fired ovens and furnaces
Burner-fired equipment with a gas train and flame safeguard. A combustion appliance, and likely a separate route from the electric units.
Each type is confirmed on its own classification and evidence. Which of them a single certificate can cover depends on how closely the constructions and test reports match.
Documents Required
- Product Details & Model List(every model, chamber size and maximum temperature you intend to ship)
- Datasheet & Manufacturer Details
- Lab Test Report(No report? We can arrange testing.)
- Commercial Invoice & Packing List(needed at the shipment stage, not to start)
The core set. On thermal equipment the file also turns on the declared maximum temperature, the heating method, the controller and over-temperature cut-out, and the chamber construction. Which further documents apply varies with the confirmed classification and the model scope, so the full list is issued per file rather than per category.
Sample Certificate
Illustrative layout only — not an issued certificate, and not a reproduction of one. Certificates are issued by approved conformity assessment bodies, not by BenzilaCert.
Application Examples
Typical files in this product family and the support they call for. Illustrative scenarios, not completed engagements.
- Example 01
Coating line with two heat sources
An illustrative order covering an electric curing oven and a gas-fired drying tunnel. The two are separated at the start, because the gas equipment answers almost none of the same questions.
- Example 02
Laboratory supplier shipping bench furnaces
An illustrative consignment of muffle furnaces across two chamber sizes at the same maximum temperature. Treated as user-facing bench equipment, so the enclosure and the cut-out carry the declaration.
Get Your SABER Certificate
Send the Saudi HS Code if you have it, the product specification and a commercial invoice, and we will come back with the likely route and what is missing.
* Where applicable. Timelines and charges shown are indicative and subject to documentary review, and government and SADAD fees are separate from conformity body, testing and consultancy charges. The applicable Saudi regulation and the exact HS code must be confirmed from the product specification against the current SABER and ZATCA classification.
BenzilaCert is an independent consultancy providing application and documentation support. It is not SASO, SABER or a certificate-issuing authority, and does not issue conformity certificates.

