SABER Certificate forIndustrial Gearboxes

Helical, Bevel, Worm, Planetary & Geared Motor Units

A bare gearbox carries no electrical content; bolt a motor to its input shaft and the file gains a whole electrical product. We establish which of the two you are shipping, and what the Saudi file genuinely needs for it.

A cast iron helical gear reducer with machined mounting faces and a keyed output shaft, standing beside a bevel-helical unit with a right-angle output
  • CertificatePCoC / SCoC*Product Certificate of Conformity & Shipment Certificate
  • PCoC CostUSD 300
  • Processing Time2–3 Working Days
  • SADAD FeesPaid by Importer

Product & Regulation

HS Code

HS 8483

Gearing and gear boxes. A geared motor supplied as one unit is usually read against 8501 for the motor instead. The Saudi code runs longer than four digits and is confirmed from the specification, not from the product name.

Regulation

Gearing and rotating machine standards (ISO 6336 family, with IEC 60034 where a motor is fitted); machinery scope under review

Candidate review point, not a declaration that this route applies. Confirmed against the current regulation and model scope before anything is claimed.

Product

Bare gearbox, geared motor assembly, or gear unit supplied with a drive

What the assessment reads the product as, which decides the evidence it asks for.

Types of Industrial Gearboxes

  • Helical gear reducers

    Inline units with parallel shafts, the general-purpose industrial reducer. Declared by frame size and ratio, usually across a wide catalogue span.

  • Bevel-helical gearboxes

    Right-angle units combining a bevel stage with helical stages. The output orientation is part of the model code, not a fitting option.

  • Worm gearboxes

    Compact right-angle units, often with a hollow output bore. Self-locking behaviour is sometimes claimed, and a claim like that needs support.

  • Planetary reducers

    High torque density units for heavy and precision duties. Supplied bare, or with an integral flange for one specific motor family.

  • Shaft-mounted and industrial reducers

    Large units mounted straight onto driven shafts on conveyors and mills. The mounting method matters as much as the ratio to how they are declared.

  • Geared motors

    A reducer supplied with its motor as one unit. This is the version that brings electrical evidence with it, and it is assessed accordingly.

Each type is confirmed on its own classification and evidence. Which of them a single certificate can cover depends on how closely the constructions and test reports match.

Documents Required

  • Product Details & Model List(every frame size, ratio band and mounting you intend to ship)
  • Datasheet & Manufacturer Details
  • Lab Test Report(No report? We can arrange testing.)
  • Commercial Invoice & Packing List(needed at the shipment stage, not to start)

The core set. On gearboxes the file also turns on the declared ratio range, the torque rating, the mounting arrangement, and whether a motor is fitted at all. Which further documents apply varies with the confirmed classification and the model scope, so the full list is issued per file rather than per category.

Sample Certificate

Illustrative layout only — not an issued certificate, and not a reproduction of one. Certificates are issued by approved conformity assessment bodies, not by BenzilaCert.

Application Examples

Typical files in this product family and the support they call for. Illustrative scenarios, not completed engagements.

  • Example 01

    Exporter with one catalogue, two product kinds

    An illustrative manufacturer listing bare reducers and geared motors under the same model family. The two are separated before any application, because only one of them carries an electrical file.

  • Example 02

    Importer shipping spares against a ratio list

    An illustrative consignment of replacement reducers across several ratios and mountings. The model scope is written from the ratio list, not from the frame size alone.

Get Your SABER Certificate

Send the Saudi HS Code if you have it, the product specification and a commercial invoice, and we will come back with the likely route and what is missing.

WhatsApp: +91 91300 30031No Advance Payment | Available 24/7

* Where applicable. Timelines and charges shown are indicative and subject to documentary review, and government and SADAD fees are separate from conformity body, testing and consultancy charges. The applicable Saudi regulation and the exact HS code must be confirmed from the product specification against the current SABER and ZATCA classification.
BenzilaCert is an independent consultancy providing application and documentation support. It is not SASO, SABER or a certificate-issuing authority, and does not issue conformity certificates.