SABER Certificate forFlexible Hoses

Hydraulic, Air, Water, Gas & Industrial Hose Assemblies

The product here is the assembly, not the hose. What fails in service is the joint between hose and end fitting, so the rated item is one hose crimped to a named coupling. Change the fitting or the crimp and the test stops describing what you are shipping.

A coiled rubber-covered hydraulic hose assembly with crimped steel ferrules, a swivel nut at one end and an elbow fitting at the other
  • CertificatePCoC / SCoC*Product Certificate of Conformity & Shipment Certificate
  • PCoC CostUSD 300
  • Processing Time2–3 Working Days
  • SADAD FeesPaid by Importer

Product & Regulation

HS Code

HS 4009

Tubes, pipes and hoses of vulcanised rubber, with or without fittings. A thermoplastic hose falls under 3917 and a metal flexible hose under 8307 instead, so one invoice of hose assemblies can span three headings. The Saudi code runs longer than four digits and is confirmed from the construction and the declared service, not from the product name.

Regulation

Hose assembly requirements (rated working and burst pressure, coupling retention, reinforcement construction and medium compatibility); separate treatment of gas and drinking-water duty under review

Candidate review point, not a declaration that this route applies. Confirmed against the current regulation and model scope before anything is claimed.

Product

Hose supplied by the length, a finished hose assembly with fittings, or a flexible connector for a fixed installation

What the assessment reads the product as, which decides the evidence it asks for.

Types of Flexible Hoses

  • Hydraulic hose assemblies

    Wire-braided and spiral-wound hose crimped to couplings. Rated by pressure and impulse life, and the crimp is part of the rating.

  • Air and compressed gas hose

    Rubber and thermoplastic hose for compressed air and industrial gases. Whip-back restraint and coupling retention sit alongside pressure.

  • Water and drinking-water hose

    Delivery, suction and potable water hose. Potable duty adds material migration evidence to the pressure evidence.

  • LPG and fuel hose

    Hose for LPG, gas appliances and fuel transfer. The highest-consequence family here, and the one most likely to take its own route.

  • Metal and corrugated flexible hose

    Stainless corrugated and braided hose and expansion connectors. Proved on cycle life and end-joint integrity rather than on a rubber compound.

  • Couplings, ferrules and adaptors

    End fittings supplied loose. Only meaningful against the hose they are crimped to, so they are declared as a pair.

Each type is confirmed on its own classification and evidence. Which of them a single certificate can cover depends on how closely the constructions and test reports match.

Documents Required

  • Product Details & Model List(hose construction with the coupling and crimp declared for each assembly)
  • Datasheet & Manufacturer Details
  • Lab Test Report(No report? We can arrange testing.)
  • Commercial Invoice & Packing List(needed at the shipment stage, not to start)

The core set. On hose the file also turns on the reinforcement construction and number of plies, the rated working and burst pressure, the coupling and ferrule part numbers with the crimp dimension, the medium and temperature range, and whether the hose ships by the length or as a finished assembly. Which further documents apply varies with the confirmed classification and the model scope, so the full list is issued per file rather than per category.

Sample Certificate

Illustrative layout only — not an issued certificate, and not a reproduction of one. Certificates are issued by approved conformity assessment bodies, not by BenzilaCert.

Application Examples

Typical files in this product family and the support they call for. Illustrative scenarios, not completed engagements.

  • Example 01

    Manufacturer shipping hydraulic assemblies

    An illustrative hose maker supplying 200 made-up lengths from four hose constructions and twelve coupling types. The range groups by hose construction and coupling family, since the crimp belongs to the pair.

  • Example 02

    Importer bringing hose by the reel

    An illustrative consignment of bulk hose reels with loose couplings, intended to be cut and crimped in the Kingdom. Hose and fittings are declared separately and the assembly question is settled before shipping.

Get Your SABER Certificate

Send the Saudi HS Code if you have it, the product specification and a commercial invoice, and we will come back with the likely route and what is missing.

WhatsApp: +91 91300 30031No Advance Payment | Available 24/7

* Where applicable. Timelines and charges shown are indicative and subject to documentary review, and government and SADAD fees are separate from conformity body, testing and consultancy charges. The applicable Saudi regulation and the exact HS code must be confirmed from the product specification against the current SABER and ZATCA classification.
BenzilaCert is an independent consultancy providing application and documentation support. It is not SASO, SABER or a certificate-issuing authority, and does not issue conformity certificates.