SABER Certificate forFire Doors
Fire-Rated Doorsets, Frames, Seals & Door Hardware
A fire rating belongs to the doorset, not the leaf. The report describes one build — leaf, frame, seals, hinges, closer and glazing together — so a substituted hinge or an added vision panel puts your shipment outside the test it quotes.

- CertificatePCoC / SCoC*Product Certificate of Conformity & Shipment Certificate
- PCoC CostUSD 300
- Processing Time2–3 Working Days
- SADAD FeesPaid by Importer
Product & Regulation
HS Code
HS 7308
Structures and parts of structures of iron or steel, which covers steel doors and their frames. A timber-based fire door falls under 4418 and door hardware supplied loose under 8302 instead, so one doorset order can span three headings. The Saudi code runs longer than four digits and is confirmed from the construction, not from the product name.
Regulation
Fire-resistance performance of the complete doorset (integrity and insulation period, smoke leakage, seals and hardware as tested) with the supporting construction named; acceptance route and any Civil Defence step under review
Candidate review point, not a declaration that this route applies. Confirmed against the current regulation and model scope before anything is claimed.
Product
Complete fire-rated doorset, a rated leaf or frame supplied separately, or doorset hardware and sealing components
What the assessment reads the product as, which decides the evidence it asks for.
Types of Fire Doors
Steel fire doors
Single and double-leaf steel doorsets with mineral cores. Core, facing gauge and frame profile are read as one build.
Timber fire doors
Flush timber leaves on a rated core with lippings and facings. The lipping and facing are part of the tested construction.
Glazed and vision panel doors
Doorsets with fire-rated glazing. The glass, bead and gasket are a tested system, so a panel cannot simply be added.
Frames and supporting construction
Door frames and subframes. A rating is only proved in the wall type the report names, masonry and drywall apart.
Intumescent and smoke seals
Intumescent strips and cold smoke brushes. Smoke leakage is a separate claim from the fire-resistance period.
Hinges, closers and locks
Hardware fitted to a rated door. Must match the schedule tested, since substituting a closer or hinge voids the claim.
Each type is confirmed on its own classification and evidence. Which of them a single certificate can cover depends on how closely the constructions and test reports match.
Documents Required
- Product Details & Model List(every doorset configuration with its rating and hardware schedule)
- Datasheet & Manufacturer Details
- Lab Test Report(No report? We can arrange testing.)
- Commercial Invoice & Packing List(needed at the shipment stage, not to start)
The core set. On fire doors the file also turns on the rating claimed and its integrity and insulation period, the exact leaf and frame construction, the hardware schedule the door was tested with, the supporting wall construction named in the report, the glazed area if any, and the leaf sizes the report actually covers. Which further documents apply varies with the confirmed classification and the model scope, so the full list is issued per file rather than per category.
Sample Certificate
Illustrative layout only — not an issued certificate, and not a reproduction of one. Certificates are issued by approved conformity assessment bodies, not by BenzilaCert.
Application Examples
Typical files in this product family and the support they call for. Illustrative scenarios, not completed engagements.
- Example 01
Manufacturer shipping rated doorsets
An illustrative door maker with four leaf constructions and three rating periods. The range groups by tested configuration rather than by finish, and each group carries the hardware schedule it was proved with.
- Example 02
Project importer with a door schedule
An illustrative consignment for one building, mixing rated and unrated doors with loose hardware. Rated doorsets are separated from ordinary doors and each rating is matched to a report before the shipment certificate.
Get Your SABER Certificate
Send the Saudi HS Code if you have it, the product specification and a commercial invoice, and we will come back with the likely route and what is missing.
* Where applicable. Timelines and charges shown are indicative and subject to documentary review, and government and SADAD fees are separate from conformity body, testing and consultancy charges. The applicable Saudi regulation and the exact HS code must be confirmed from the product specification against the current SABER and ZATCA classification.
BenzilaCert is an independent consultancy providing application and documentation support. It is not SASO, SABER or a certificate-issuing authority, and does not issue conformity certificates.

