SABER Certificate forFall Protection Equipment

Harnesses, Lanyards, Energy Absorbers, Self-Retracting Devices & Anchors

Fall protection is certified as a tested combination, not as a worn article: the arrest force and the clearance needed below the worker belong to the harness, lanyard, connector and anchor together. We establish which parts were tested as one before the harness evidence is collected.

A full body safety harness laid out flat and open with its shoulder and leg webbing spread and a dorsal D-ring on the back pad, a coiled energy-absorbing lanyard resting within the harness outline and two steel scaffold hooks on a tear-webbing pack alongside
  • CertificatePCoC / SCoC*Product Certificate of Conformity & Shipment Certificate
  • PCoC CostUSD 300
  • Processing Time2–3 Working Days
  • SADAD FeesPaid by Importer

Product & Regulation

HS Code

HS 6307

Other made-up textile articles, which is where a webbing safety harness and a textile lanyard sit. A metal connector, karabiner or anchor device falls under 7326 or 8308, a self-retracting device with a braked drum under 8425 or 8479 depending on construction, and a synthetic rope lifeline under 5607, so one fall protection order routinely spans four headings. The Saudi code runs longer than four digits and is confirmed from the construction and the declared function, not from the product name.

Regulation

Personal fall protection requirements at the highest PPE risk class, covering static and dynamic strength of each component, arrest force and deployment of the energy absorber and the clearance required below the anchor, with a conformity route carrying continuing oversight of production rather than a single type test; candidate pending verification

Candidate review point, not a declaration that this route applies. Confirmed against the current regulation and model scope before anything is claimed.

Product

A component of a personal fall arrest or restraint system — harness, lanyard, energy absorber, self-retracting device, connector or anchor device — declared with the combination it was tested in. Collective edge protection and load-rated lifting gear are different product classes

What the assessment reads the product as, which decides the evidence it asks for.

Types of Fall Protection Equipment

  • Full body harnesses and work positioning belts

    Fall arrest harnesses, positioning and seat harnesses and rescue harnesses. Rated with a stated user mass range, and an attachment point that is only for restraint cannot be used to arrest a fall.

  • Lanyards and energy absorbers

    Webbing and rope lanyards, tear-webbing and in-line energy absorbers and twin-leg assemblies. The part that sets the arrest force, which is why lanyard length is a certification matter and not a convenience.

  • Self-retracting devices and fall arrest blocks

    Cable and webbing retractable blocks with internal braking, some with a rescue winch built in. Assessed on braking and on arrest distance, and the winch function does not make it lifting gear.

  • Guided type fall arresters and rope systems

    Rope grabs, rail-guided arresters and vertical lifeline kits for ladders and towers. Certified against a named rope or rail section only, so a substituted rope diameter voids the pairing.

  • Connectors, karabiners and slings

    Screwgate and self-locking karabiners, scaffold hooks and anchor slings. Small items, but the gate type and the minor-axis strength change what the assembly is rated for.

  • Anchor devices and horizontal lifelines

    Eyebolts, plate anchors, beam clamps, mobile dead-weight anchors and horizontal line systems. The product evidence stops at the device; what it actually holds depends on the structure it is fixed to.

Each type is confirmed on its own classification and evidence. Which of them a single certificate can cover depends on how closely the constructions and test reports match.

Documents Required

  • Product Details & Model List(with the tested harness, lanyard, connector and anchor combination stated)
  • Datasheet & Manufacturer Details
  • Lab Test Report(No report? We can arrange testing.)
  • Commercial Invoice & Packing List(needed at the shipment stage, not to start)

The core set. On fall protection the file also turns on which components were tested together as one system, the arrest force and energy absorber deployment, the free fall distance allowed and the total clearance required below the anchor, the user mass range the test covers, the webbing material and its ultraviolet resistance, the date of manufacture and declared service life, and for an anchor device the substrate the rating assumes. Which further documents apply varies with the confirmed classification and the model scope, so the full list is issued per file rather than per category.

Sample Certificate

Illustrative layout only — not an issued certificate, and not a reproduction of one. Certificates are issued by approved conformity assessment bodies, not by BenzilaCert.

Application Examples

Typical files in this product family and the support they call for. Illustrative scenarios, not completed engagements.

  • Example 01

    Maker shipping harness and lanyard kits

    An illustrative manufacturer sending harness and twin-leg lanyard kits in two lanyard lengths. One harness and two kits, because the arrest force and the clearance needed below the anchor are not the same for both.

  • Example 02

    Distributor importing mixed site PPE

    An illustrative distributor bringing in harnesses, blocks, hi-vis vests and gloves on one invoice. The fall protection lines are separated from the rest first, because they do not share a route with the clothing.

Get Your SABER Certificate

Send the Saudi HS Code if you have it, the product specification and a commercial invoice, and we will come back with the likely route and what is missing.

WhatsApp: +91 91300 30031No Advance Payment | Available 24/7

* Where applicable. Timelines and charges shown are indicative and subject to documentary review, and government and SADAD fees are separate from conformity body, testing and consultancy charges. The applicable Saudi regulation and the exact HS code must be confirmed from the product specification against the current SABER and ZATCA classification.
BenzilaCert is an independent consultancy providing application and documentation support. It is not SASO, SABER or a certificate-issuing authority, and does not issue conformity certificates.