SABER Certificate forEmergency Showers & Eyewash Stations
Combination Safety Showers, Eyewash & Face Wash Stations, Drench Hoses & Tepid Water Units
An emergency shower is certified as a plumbing fitting on a measured flow pattern held for fifteen minutes — which is only true of a supply that can deliver it, so the fitting carries half the claim and the installation the other half. We separate the two before the evidence is collected.

- CertificatePCoC / SCoC*Product Certificate of Conformity & Shipment Certificate
- PCoC CostUSD 300
- Processing Time2–3 Working Days
- SADAD FeesPaid by Importer
Product & Regulation
HS Code
HS 7324
Sanitary ware and parts thereof of iron or steel, which is where a plumbed-in safety shower or eyewash assembly generally sits. A moulded plastic bowl or portable tank falls under 3922 or 3925, the stay-open valve and the thermostatic mixing valve under 8481, an electrically heated or trace-heated unit under 8516, the riser and fittings under 7307, and a stainless bowl under 7324 or 7326. One station routinely spans three headings. The Saudi code runs longer than four digits and is confirmed from the construction and the declared function, not from the product name.
Regulation
Emergency eyewash and drench shower performance requirements covering the spray pattern and the area it covers at a stated height, the minimum flow rate at a stated supply pressure, the fifteen-minute flush duration, a valve that opens in one second and stays open hands-free, and the delivered water temperature range; candidate pending verification
Candidate review point, not a declaration that this route applies. Confirmed against the current regulation and model scope before anything is claimed.
Product
A plumbing fitting supplied for emergency flushing, assessed on a measured flow pattern rather than on strength or finish. A thermostatic mixing valve, an electrically heated tepid-water unit and a portable self-contained tank are separate products inside the same order
What the assessment reads the product as, which decides the evidence it asks for.
Types of Emergency Showers & Eyewash Stations
Combination showers and drench showers
Floor-standing and ceiling-mounted showers, with or without an eyewash bowl on the same riser. The wide head and the stay-open valve are the certified parts; the riser is pipework.
Plumbed eyewash and face wash stations
Bench, pedestal and wall eyewash units with twin spray heads and dust caps. Low velocity matters more than flow here, because the water lands on an open eye.
Drench hoses and hand-held units
Hand-held drench hoses used alone or alongside a fixed station. Supplementary equipment: useful, but it does not satisfy a fixed shower requirement on its own.
Portable and gravity-fed eyewash tanks
Self-contained tanks for places with no plumbed supply. Assessed on the preserved fill and its shelf life as much as on the nozzles, and the expiry date arrives with the unit.
Thermostatic mixing valves and tepid water units
Mixing valves, sensing elements and tepid-water skids. What delivers a usable temperature, and what has to fail safe when the cold supply drops out.
Enclosed, heated and outdoor-rated stations
Cubicle and tank showers, trace-heated and frost-protected units for outdoor plant. Once the unit is heated or traced it is partly an electrical product as well.
Each type is confirmed on its own classification and evidence. Which of them a single certificate can cover depends on how closely the constructions and test reports match.
Documents Required
- Product Details & Model List(with the flow rate and the pressure it was measured at)
- Datasheet & Manufacturer Details
- Lab Test Report(No report? We can arrange testing.)
- Commercial Invoice & Packing List(needed at the shipment stage, not to start)
The core set. On emergency flushing equipment the file also turns on the flow rate and the supply pressure it was measured at, the spray pattern and its coverage at a stated height, the flush duration, the valve activation force and its stay-open action, the delivered temperature range and the mixing valve behaviour when the cold supply fails, the materials in contact with the flushing water, and for a portable tank the preserved fill and its expiry date. Which further documents apply varies with the confirmed classification and the model scope, so the full list is issued per file rather than per category.
Sample Certificate
Illustrative layout only — not an issued certificate, and not a reproduction of one. Certificates are issued by approved conformity assessment bodies, not by BenzilaCert.
Application Examples
Typical files in this product family and the support they call for. Illustrative scenarios, not completed engagements.
- Example 01
Maker shipping one shower with two valve options
An illustrative manufacturer sending a combination shower offered with a plain stay-open valve and with a thermostatic mixing valve. Two products, because the mixing valve brings its own failure mode into the file.
- Example 02
Contractor importing stations for a plant
An illustrative contractor bringing in plumbed stations and portable tanks for one site. The portable tanks are separated first, because what is being certified there is a fluid with a shelf life.
Get Your SABER Certificate
Send the Saudi HS Code if you have it, the product specification and a commercial invoice, and we will come back with the likely route and what is missing.
* Where applicable. Timelines and charges shown are indicative and subject to documentary review, and government and SADAD fees are separate from conformity body, testing and consultancy charges. The applicable Saudi regulation and the exact HS code must be confirmed from the product specification against the current SABER and ZATCA classification.
BenzilaCert is an independent consultancy providing application and documentation support. It is not SASO, SABER or a certificate-issuing authority, and does not issue conformity certificates.

