SABER Certificate forAutomotive Mirrors & Glass
Windscreens, Side & Rear Glazing, Mirrors & Mirror Assemblies
Laminated and toughened glazing are different products, and the position each is allowed to occupy follows from that rather than from its size. A heated powered mirror is a glazing product with an electrical one inside it. We establish both before anything is filed.

- CertificatePCoC / SCoC*Product Certificate of Conformity & Shipment Certificate
- PCoC CostUSD 300
- Processing Time2–3 Working Days
- SADAD FeesPaid by Importer
Product & Regulation
HS Code
HS 7007
Safety glass, toughened and laminated, in sizes and shapes for vehicles. Glass mirrors fall under 7009 and a powered mirror assembly can be read against 8512 instead. The Saudi code runs longer than four digits and is confirmed from the specification, not from the product name.
Regulation
Vehicle safety glazing and rear-view mirror approvals (UN ECE glazing and mirror families, with light transmittance limits); route under review
Candidate review point, not a declaration that this route applies. Confirmed against the current regulation and model scope before anything is claimed.
Product
Laminated glazing, toughened glazing, mirror element, or powered mirror assembly
What the assessment reads the product as, which decides the evidence it asks for.
Types of Automotive Mirrors & Glass
Laminated windscreens
Two glass plies bonded to an interlayer, the only construction normally accepted in the windscreen position. Light transmittance is a declared figure.
Toughened side and rear glazing
Heat-strengthened glass breaking into blunt fragments. Different failure behaviour from laminated, so it is a different approval.
Heated and solar glazing
Rear screens with printed heating elements, and solar-control and acoustic laminates. Each added layer is an added claim on the file.
Exterior mirrors
Door and wing mirror assemblies, manual and powered. Class and field of view are the approval; the motor and heater are electrical content.
Interior mirrors
Rear view mirrors, plain, dimming and camera-equipped. A camera or display turns it into an electronic device as well as a mirror.
Commercial vehicle mirrors
Wide-angle, close-proximity and front mirrors for trucks and buses. More mirror classes per vehicle, each with its own field of view.
Each type is confirmed on its own classification and evidence. Which of them a single certificate can cover depends on how closely the constructions and test reports match.
Documents Required
- Product Details & Model List(every part number, its construction and the glazing position claimed)
- Datasheet & Manufacturer Details
- Lab Test Report(No report? We can arrange testing.)
- Commercial Invoice & Packing List(needed at the shipment stage, not to start)
The core set. On glazing the file also turns on the construction — laminated or toughened — the glazing position claimed, the measured light transmittance, and for mirrors the class, radius of curvature and any heater or motor fitted. Which further documents apply varies with the confirmed classification and the model scope, so the full list is issued per file rather than per category.
Sample Certificate
Illustrative layout only — not an issued certificate, and not a reproduction of one. Certificates are issued by approved conformity assessment bodies, not by BenzilaCert.
Application Examples
Typical files in this product family and the support they call for. Illustrative scenarios, not completed engagements.
- Example 01
Manufacturer shipping replacement windscreens
An illustrative glass maker supplying laminated screens for 120 vehicle models. The range is grouped by construction and interlayer rather than by model, since that is what the glazing evidence covers.
- Example 02
Importer with mirrors and loose glass
An illustrative consignment of powered door mirrors and loose replacement mirror elements. The powered assemblies are separated out, because the glazing file does not answer for the motor and heater.
Get Your SABER Certificate
Send the Saudi HS Code if you have it, the product specification and a commercial invoice, and we will come back with the likely route and what is missing.
* Where applicable. Timelines and charges shown are indicative and subject to documentary review, and government and SADAD fees are separate from conformity body, testing and consultancy charges. The applicable Saudi regulation and the exact HS code must be confirmed from the product specification against the current SABER and ZATCA classification.
BenzilaCert is an independent consultancy providing application and documentation support. It is not SASO, SABER or a certificate-issuing authority, and does not issue conformity certificates.

