SABER Certificate forAutomotive Lubricants & Fluids

Engine Oils, Gear Oils, Coolants, Brake Fluid & Service Fluids

A fluid has no drawing and nothing to measure on arrival, so the file is the blend, the performance level claimed for it and the pack it ships in. We separate the petroleum oils from the chemical preparations on your invoice before anything is filed.

Three plain unlabelled engine oil containers of different sizes standing beside an open funnel on a plain surface
  • CertificatePCoC / SCoC*Product Certificate of Conformity & Shipment Certificate
  • PCoC CostUSD 300
  • Processing Time2–3 Working Days
  • SADAD FeesPaid by Importer

Product & Regulation

HS Code

HS 2710

Petroleum oils and preparations, which is where mineral and synthetic lubricating oils sit. Brake and hydraulic fluids fall under 3819 and antifreeze preparations under 3820, because those are chemical preparations rather than petroleum fractions. The Saudi code runs longer than four digits and is confirmed from the formulation, not from the product name.

Regulation

Lubricant performance specifications (API, ACEA and SAE viscosity families; brake fluid to the SAE J1703 / FMVSS 116 families) plus declared volume and labelling requirements; route between a product certificate and a batch declaration under review

Candidate review point, not a declaration that this route applies. Confirmed against the current regulation and model scope before anything is claimed.

Product

Finished lubricating oil, chemical service fluid, or bulk versus retail pack

What the assessment reads the product as, which decides the evidence it asks for.

Types of Automotive Lubricants & Fluids

  • Engine oils

    Mineral, semi-synthetic and fully synthetic engine oils. Answered on viscosity grade and the service category claimed for the blend.

  • Gear and transmission oils

    Manual gear oils, automatic transmission fluid and axle oils. A different performance family from engine oil, and graded separately.

  • Brake and hydraulic fluids

    Brake and clutch fluids and hydraulic oils. Chemical preparations on boiling point and compatibility, not on viscosity grade.

  • Coolants and antifreeze

    Concentrates and ready-mixed coolants. Composition and corrosion inhibitor package, with the dilution stated on the pack.

  • Greases and specialty lubricants

    Chassis and bearing greases, assembly pastes and chain lubricants. Thickener type and consistency rather than a flow grade.

  • Bulk drums against retail packs

    Drums and totes for workshops, bottles and cans for resale. The retail pack adds declared volume and consumer marking the drum does not.

Each type is confirmed on its own classification and evidence. Which of them a single certificate can cover depends on how closely the constructions and test reports match.

Documents Required

  • Product Details & Pack Sizes(every grade, viscosity and container size on the invoice)
  • Technical Data Sheet & Safety Data Sheet(the SDS is asked for on fluids, not only the TDS)
  • Lab Test Report(No report? We can arrange testing.)
  • Commercial Invoice & Packing List(needed at the shipment stage, not to start)

The core set. On fluids the file also turns on who holds the performance licence for the blend, the batch or blend number the consignment was filled from, the declared volume and Arabic marking on each pack size, and whether the fluid is classified as a dangerous good in transport. Which further documents apply varies with the confirmed classification and the model scope, so the full list is issued per file rather than per category.

Sample Certificate

Illustrative layout only — not an issued certificate, and not a reproduction of one. Certificates are issued by approved conformity assessment bodies, not by BenzilaCert.

Application Examples

Typical files in this product family and the support they call for. Illustrative scenarios, not completed engagements.

  • Example 01

    Blender shipping a retail oil range

    An illustrative blender with one synthetic oil in four viscosity grades and three pack sizes. Grades group by performance licence; the pack sizes are a labelling question handled separately.

  • Example 02

    Importer with a mixed fluid pallet

    An illustrative consignment of engine oil, brake fluid and coolant concentrate. The petroleum and chemical preparation lines are split before the shipment certificate, because they do not share a heading.

Get Your SABER Certificate

Send the Saudi HS Code if you have it, the product specification and a commercial invoice, and we will come back with the likely route and what is missing.

WhatsApp: +91 91300 30031No Advance Payment | Available 24/7

* Where applicable. Timelines and charges shown are indicative and subject to documentary review, and government and SADAD fees are separate from conformity body, testing and consultancy charges. The applicable Saudi regulation and the exact HS code must be confirmed from the product specification against the current SABER and ZATCA classification.
BenzilaCert is an independent consultancy providing application and documentation support. It is not SASO, SABER or a certificate-issuing authority, and does not issue conformity certificates.