SABER Certificate forAccess Control & Entrance Systems

Electric Locks, Credential Readers, Controllers & Entrance Control Equipment

A controlled door arrives as a lock, a controller and a reader, and each of the three is its own product with its own evidence. We separate them first, flag any reader with a radio interface, and settle what the door must do in a power cut before anything is applied for.

An electric mortice lock case with its bolt thrown and a separate electric strike plate standing on edge beside it, with a rectangular magnetic lock and its steel armature plate lying flat in front
  • CertificatePCoC / SCoC*Product Certificate of Conformity & Shipment Certificate
  • PCoC CostUSD 300
  • Processing Time2–3 Working Days
  • SADAD FeesPaid by Importer

Product & Regulation

HS Code

HS 8301

Locks of base metal, including electrically operated locks, which is where an electric lock, strike or magnetic lock sits. A credential reader falls under 8543 or 8471 depending on construction, a door controller under 8537, a turnstile or speed gate under 8479 and closers and mounting hardware under 8302, so one access control order routinely spans four headings. The Saudi code runs longer than four digits and is confirmed from the construction and the declared function, not from the product name.

Regulation

Low-voltage electrical safety requirements for the reader, controller and power supply, with building hardware and escape-route release requirements applying to the locking device and exit hardware, and communications type approval applying separately to any reader with a radio interface; candidate pending verification

Candidate review point, not a declaration that this route applies. Confirmed against the current regulation and model scope before anything is claimed.

Product

A locking device, a credential reader, a door controller or power supply, a powered entrance machine such as a turnstile or speed gate, or an automatic door operator — each its own product even when ordered as one system

What the assessment reads the product as, which decides the evidence it asks for.

Types of Access Control & Entrance Systems

  • Electric locks, strikes and magnetic locks

    Solenoid and motorised mortice locks, electric strikes and surface magnetic locks. Whether the door releases or stays locked when the supply drops is settled first, because the escape route decides which answer is allowed.

  • Credential readers and keypads

    Card, fob, mobile and biometric readers and wired keypads. Anything that reads a credential over radio carries a communications approval question the electrical report does not cover.

  • Door controllers and power supplies

    Door controllers, interface boards and the standby supply that holds a door in a mains failure. Separate electrical products, and usually the items a consignment waits on.

  • Turnstiles, speed gates and pedestrian barriers

    Tripod turnstiles, full-height gates and glass speed-gate lanes. Powered machines with moving parts in contact with people, so guarding and obstruction response weigh as much as the electrics.

  • Automatic door operators and sensors

    Sliding and swing door operators with their presence and safety sensors. Operator and sensor are assessed together, because the sensor is what stops the door on a person.

  • Exit devices and emergency release

    Push bars, touch bars, break-glass units and request-to-exit buttons. Mechanical life-safety hardware whose job is to defeat the electronics, which is why it is never a reader accessory.

Each type is confirmed on its own classification and evidence. Which of them a single certificate can cover depends on how closely the constructions and test reports match.

Documents Required

  • Product Details & Model List(with the lock, reader, controller and power supply listed as their own items)
  • Datasheet & Manufacturer Details
  • Lab Test Report(No report? We can arrange testing.)
  • Commercial Invoice & Packing List(needed at the shipment stage, not to start)

The core set. On access control the file also turns on the supply voltage and standby arrangement, whether the lock is fail-safe or fail-secure and what the escape route requires, the holding force or bolt projection, the credential technology and any radio frequency and power used, the ingress rating where the unit is mounted outdoors, and whether the hardware is being fitted to a fire-rated doorset. Which further documents apply varies with the confirmed classification and the model scope, so the full list is issued per file rather than per category.

Sample Certificate

Illustrative layout only — not an issued certificate, and not a reproduction of one. Certificates are issued by approved conformity assessment bodies, not by BenzilaCert.

Application Examples

Typical files in this product family and the support they call for. Illustrative scenarios, not completed engagements.

  • Example 01

    Integrator fitting hardware to rated doorsets

    An illustrative contractor importing magnetic locks, readers and controllers for doors that are themselves fire-rated doorsets. The hardware is handled as three products, and the effect of cutting the frame goes back to the doorset report before anything is fitted.

  • Example 02

    Distributor stocking readers and controllers

    An illustrative distributor bringing in a reader range for resale from stock, part wired and part contactless. The contactless models are separated out first, because only they carry the radio approval question.

Get Your SABER Certificate

Send the Saudi HS Code if you have it, the product specification and a commercial invoice, and we will come back with the likely route and what is missing.

WhatsApp: +91 91300 30031No Advance Payment | Available 24/7

* Where applicable. Timelines and charges shown are indicative and subject to documentary review, and government and SADAD fees are separate from conformity body, testing and consultancy charges. The applicable Saudi regulation and the exact HS code must be confirmed from the product specification against the current SABER and ZATCA classification.
BenzilaCert is an independent consultancy providing application and documentation support. It is not SASO, SABER or a certificate-issuing authority, and does not issue conformity certificates.